※3営業日以内に発送します。土曜・日曜・祝日の発送はありません。
【Beta85X/95X推奨FC】 BetaFPV F4 Brushless Flight Controller and ESC16A V2.0 (BLHeli_32) 4S対応
【Beta85X/95X推奨FC】 BetaFPV F4 Brushless Flight Controller and ESC16A V2.0 (BLHeli_32) 4S対応
¥6,800
SOLD OUT
【Beta85X/95X推奨FC】 BetaFPV F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32) ※XT30コネクターです。
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
【Beta85X/95X推奨FC】 BetaFPV F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32) ※XT30コネクターです。
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
ショップの評価
【Beta85X/95X推奨FC】 BetaFPV F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32) ※XT30コネクターです。
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
※ESCは16Aです。
FCとESC16Aが分かれたタイプです（コネクターを半田してコネクターで繋ぎます。）
４S対応。
※レシーバーは付いていません。
※マニュアルは付いていませんのでメーカーのHPをご参照下さい。
https://betafpv.com/collections/brushless-flight-controller/products/f405-4s-brushless-flight-controller-and-esc-blheli_32?variant=29157021679660
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 4.2g
SPECIFICATIONS OF ESC
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
仕様：
モデル：Beta85X/95X
PACKAGE
1 * F405 4S Brushless Flight Controller
1 * 16A BLHeli_32 ESC
1 * 4P Cable for RX
1 * 3P Cable for LED board
4 * M1.4x4mm screws
4 * 1.2mm Anti-vibration ruber dampers
